S10/T10 Blazer 4WD V6-262 4.3L (1989)
inserted through the mode indicator. (Fig.3)
13.
Torque the housing, baseplate and blower switch mounting screws to 6-10 lbs.in.
14.
If necessary, install new knobs on mode, temperature, and blower controls to ensure proper retention.
SERVICE PARTS INFORMATION
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
LABOR OPERATION
DESCRIPTION
D0362
R & R HVAC control
ADD: Replace housing
Use applicable labor time guide for labor hours.
