S10/T10 Blazer 4WD V6-262 4.3L VIN Z (1994)
Fuel Pump Relay: Service and Repair
Relay Center 2.5L,2.8L S
REMOVE/DISCONNECT
1. Verify that ignition switch is in the "OFF" position.
2. Retainer, if installed.
3. Electrical connector.
4. Fuel pump relay by depressing bracket clip at rear of relay, or removing bolts from retaining bracket.
INSTALL/DISCONNECT
1. Fuel pump relay.
2. Electrical connector.
3. Retainer.
4. Verify correct operation to confirm repair.