S10/T10 Blazer 4WD V6-262 4.3L VIN Z (1994)
^
Lubricate outer surface with lithium grease.
2. Bearing retainer (50).
3. Lower bearing adapter clip (51).
4. Steering column to vehicle.
5. Negative (-) battery cable.
Ignition Lock Cylinder & Upper Column Components - Column Shift
UPPER COLUMN
INCLUDES:
STEERING COLUMN LOCK CYLINDER SET
SHAFT LOCK
TURN SIGNAL CANCELLING CAM ASSEMBLY
UPPER BEARING SPRING
UPPER BEARING INNER RACE SEAT
INNER RACE
TURN SIGNAL SWITCH ASSEMBLY
BUZZER SWITCH ASSEMBLY
TOOLS REQUIRED:
^
J 23653-C Lock Plate Compressor
IMPORTANT
^
Before doing any service procedures in this section, removal of Steering Wheel is needed.
REMOVE OR DISCONNECT
