S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
3. Screws from the cross rails.
Luggage Carrier Assembly
4. Cross rails from the sliders.
5. Rubber strips from cross bar assemblies.
Luggage Carrier Mounting
6. Tap plates from cross rails.
7. Loosen knobs from the sliders and lock plates in the side rails.
8. Sliders and lock plates from the slots in side rails.
ASSEMBLE
NOTE: Only hand tools should be used during installation. The use of power tools may result in the cross-threading of mounting fasteners,
nicks and scratches of component parts.
1. Sliders and lock plates into the slots in the side rails.
2. Hand tighten knobs into the sliders and the lock plates.