S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
NOTE: The gears must mesh in order to prevent damage to the camshaft retainer.
4. Install camshaft sprocket bolts.
CAUTION Be sure to align the camshaft and the crankshaft sprocket marks.
^
Tighten bolts to 25 Nm (18 ft. lbs.)
5. Align the keyway on the reluctor ring with the key in the crankshaft.
6. Install the reluctor ring onto the crankshaft until the ring is completely seated against the crankshaft sprocket.
7. Install the timing cover.