S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Marker Lamp: Service and Repair
Description
Remove or Disconnect
-
Make sure the headlamp switch is in the OFF position.
-
Make sure the ignition switch is in the LOCK position.
1. Screws that retain the side marker lamp to the vehicle.
2. Side marker lamp from the vehicle.
3. Bulb and socket from the side marker lamp by rotating it 1/4 turn counterclockwise.
4. Bulb from the socket.
Install or Connect
1. Bulb to the socket.
2. Bulb and socket to the lens by rotating it 1/4 turn clockwise.
3. Side marker lamp to the vehicle.
-
Insert tabs into the locators.
4. Screws that retain the side marker lamp to the vehicle.
Tighten
-
Screws to 1.5 N.m (13 lb in).