S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Fluid - Transfer Case: Service and Repair
REMOVE OR DISCONNECT
-
Raise the vehicle and suitably support it.
1. Transfer case shield.
-
Place a drain pan under the drain plug.
2. Drain plug. Allow the oil to drain.
3. Fill plug.
INSTALL OR CONNECT
1. Drain plug.
-
Apply pipe sealant to the threads of the drain plug before installing.
-
Tighten drain plug to 25 Nm (18 ft. lbs.).
2. Fill the transfer case with oil.
3. Fill plug.
-
Apply pipe sealant to the threads of the fill plug before installing.
-
Tighten fill plug to 25 Nm (18 ft. lbs.).
4. Transfer case shield.
-
Lower the vehicle.