S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Starter Motor Replacement: Removal Procedure
5. Connect the wires to the solenoid.
6. Install the flywheel cover.
7. Connect the negative battery cable.
STARTER MOTOR REPLACEMENT (4.3L 4WD)
REMOVAL PROCEDURE
Starter Motor Replacement: Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the engine mounts.
3. Raise the engine.
4. Support the engine.
5. Remove the transmission mount.
6. Support the transmission assembly.
7. Remove the starter mounting bolts. Rotate the starter for access.
Starter Motor Replacement: Removal Procedure
