S10/T10 Blazer 4WD V6-4.3L VIN W (1997)
Shift Cable: Service and Repair
Transfer Case Shift Cable
REMOVE OR DISCONNECT
-
Raise and support the vehicle.
1. Transfer case shield.
2. Control cable to the bracket retainer.
3. Control cable end from the transfer case lever.
4. Slide the control cable from the bracket.
-
Lower the vehicle.
5. Shift lever knob retainer.
6. Shift lever knob.
7. Front floor console.
8. Control lever end from the shift lever.
9. Control cable to shift lever retainer.
10. Screws securing the control cable to the floor panel.
11. Control cable from the vehicle.
INSTALL OR CONNECT
