chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Coolant Sensor - Improved Kit|Page 134 > < HEI Module - Testing Update|Page 126
Page 1
background image

Coolant Temperature Sensor/Switch (For Computer): Technical Service Bulletins
Coolant Sensor - Improved Kit

CORPORATE NUMBER: 436501R                                   NUMBER: 84-T-101

GROUP:

6B - Engine Cooling

IMPORTANT - All Service Personnel Should Read

DATE:

November, 1986

SUBJECT:

COOLANT SENSOR KIT

MODELS:

1980-84 LIGHT DUTY MODELS EQUIPPED WITH COMPUTER COMMAND CONTROL

All 1980-84 Caballeros and all 1980-84 vehicles equipped with NB2 California emissions were built with engines incorporating computer command
control. Many coolant sensors have been replaced on these vehicles as a result of a "Check Engine" light and Code 15. In many cases, the sensor was
was not defective, and the real cause was a poor connection between the sensor and the wire harness connector.
An improved coolant sensor and connector kit, P/N 10045847, containing all necessary parts, has been released for all 1980-84 GM vehicles using
Computer Command Control. This sensor is used to provide coolant temperature information to the Electronic Control Module (ECM). Separate sensors
are used for gage or warning light operation, or to activate the electric cooling fan, and are not affected.

Coolant Sensor - Improved Kit|Page 134 > < HEI Module - Testing Update|Page 126