S10/T10 P/U 2WD L4-151 2.5L (1988)
Concealment Plug Removal
If necessary to adjust minimum idle speed, the concealment plug must first be removed. Refer to Fig. 343 when removing plug.
Fuel Meter Assembly
Fuel Meter Assembly
REMOVAL:
1.
Disconnect electrical connector from fuel injector.
2.
Remove the grommet with wires from the fuel meter assembly.
3.
Remove the inlet and outlet line nuts, using backup wrench.
4.
Remove fuel line o-rings from nuts and discard.
5.
Remove TBI mounting hardware.
6.
Remove the two fuel meter attaching screw and washer assemblies.
7.
Remove the fuel meter assembly from the throttle body assembly.