chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - THM 700-R4 New Harness/Solenoid Assembly|Page 3222 > < PROM - Programmable Read Only Memory|CALPAK|Page 3214
Page 1
background image

Shift Solenoid: Technical Service Bulletins
A/T - THM 700-R4 New Harness/Solenoid Assembly

Number:

88-335-7A

Section:

7A

Date:

SEPT., 1988

Subject:

SERVICE MANUAL UPDATE: NEW SOLENOID ASSEMBLY AND WIRING HARNESS

Model and Year:

1988 C, K, R, V, S, T, G SERIES TRUCKS WITH THM 700-R4

TO:

ALL CHEVROLET DEALERS

This bulletin covers the introduction of a new Solenoid Assembly and Wiring Harness (Type 18) and new Control Valve Assembly for some 1988 THM
700-R4 models (refer to models listed below).

Transmission Models:

MAM, MDM, MFM, MKM, MLM, MPM, MRM MWM, MXM, MZM, THM, TJM, TKM, TLM TUM, TXM

The new control valve assembly uses a plug in place of the 4-3 pulse switch. The function of the 4-3 pulse switch, to momentarily release the torque
converter clutch during a 4-3 downshift, was programmed into the ECM for the 1988 model year. These models had previously used a Type 15 Solenoid
Assembly.

FIGURE 1 - THM 700-R4 TRANSMISSION IDENTIFICATION INFORMATION

A/T - THM 700-R4 New Harness/Solenoid Assembly|Page 3222 > < PROM - Programmable Read Only Memory|CALPAK|Page 3214