S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
-
Coat O-ring seal with 525 viscosity refrigerant oil.
2. Evaporator tube to condenser.
-
Tighten evaporator tube to 24 Nm (18 lbs. ft.).
3. New O-ring seal.
-
Coat O-ring seal with 525 viscosity refrigerant oil.
4. Evaporator tube to evaporator.
-
Tighten evaporator tube to 24 Nm (18 lbs. ft.).
5. Evaporator tube clip to accumulator.
6. Evaporator tube clip screw.
-
Tighten screw to 1.9 Nm (17 lbs. in.).
7. Negative battery cable.
8. Refrigerant to the system.
-
Check the system for leaks.
