S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
Upper And Lower Manifold Assembly-Part Name
Lower Manifold Assembly Removal
NOTE: A label containing the last four digits of the lower manifold assembly identification number appears on the pressure regulator. (The bar
code also contains the component number for manifolds, and the four digits of the identifying number.) Refer to this number if servicing or part
replacement is required. Refer to the disassembled view for identification of part during repair procedures.
REMOVE OR DISCONNECT
1. Relieve fuel system pressure.
-
Refer to the Fuel Pressure Relief Procedure. See: Service and Repair