S10/T10 P/U 2WD L4-2.2L VIN 4 (1995)
4. Bolts (63) to the brackets (64) and frame.
Tighten
^ Bolts (63) in tour places to 33 N.m (24 lbs. ft.).
5. Retainers (61) and grommets (60) to the link bolts (62).
^ Make sure pan positioning is correct.
6. Link bolts (62) through the lower control arm hole (59) with the pans stacked properly.
A. Grommets (58).
B. Retainers (57).
C. Spacers (56).
D. Retainers (55).
E. Grommets (54).
F. Stabilizer shaft (53) holes.
7. Grommets (52).
8. Retainers (51).
9. Nuts (50) until the nuts meet the end of the bolt threads (62).
Tighten
^ Nuts (50) to 17 N.m (13 lbs. ft.).
^ Lower the vehicle.