S10/T10 P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Removal Procedure
1. Park vehicle on a level ground and block the tires to prevent vehicle from moving.
2. Release the park brake.
3. Remove the left hinge pillar trim.
4. Loosen the park cable at the equalizer.
5. Remove the brake release handle from the park brake pedal.
6. Remove the park brake assembly mounting bolts and nut.
7. Remove the pedal assembly.
