S10/T10 P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Connect the electrical connectors to the underhood electrical center.
Tighten
Tighten the electrical connector to the underhood electrical center bolts to 7 N.m (62 lb in).
2. Install the bolts that attach the underhood electrical center to the underhood electrical center support bracket.
Tighten
Tighten the underhood fuse block to the underhood electrical center support bracket bolts to 7 N.m (62 lb in).
