chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Chevy Truck S10/T10 P/U 2WD V6-173 2.8L (1985)|Maintenance > < Drive Axle (Front) - Will Not Disengage|Page 441
Page 2
background image

Fig. 13 Windshield wiper switch removal. Tilt column

1.

Remove turn signal switch. Refer to ``Turn Signal Switch, Replace'' procedure.

2.

Refer to Figs. 12 and 13 for wiper switch replacement.  Some 1986 models use a spun-in housing bearing in place of a bearing retainer and
bushing. On these models, the complete housing assembly must be replaced if repair is necessary.

Chevy Truck S10/T10 P/U 2WD V6-173 2.8L (1985)|Maintenance > < Drive Axle (Front) - Will Not Disengage|Page 441