S10/T10 P/U 2WD V6-262 4.3L VIN W CPI (1992)
Hazard Warning Flasher: Description and Operation
Voltage is applied at all times, through the STOP-HAZ Fuse and the Hazard Flasher to the normally open contact of the Hazard Switch in the Turn
Signal Switch Assembly. With the Hazard Switch in HAZARD FLASH, voltage is applied to both Front and Rear Turn Lamps. All of the Turn Lamps
and Turn Indicators flash on and off.
The Front Marker Lamps flash in HAZARD FLASH just as they did in TURN RIGHT and TURN LEFT. If the Light Switch is in OFF, they flash on
when the Hazard Lamps are on. If the Light Switch is in either PARK or HEAD, they flash on when the Hazard Lamps are off and off when the Hazard
Lamps are on.
In HAZARD, the circuit is always open, and the Hazard Flasher controls the Lamps.
