S10/T10 P/U 2WD V6-262 4.3L VIN W CPI (1992)
Refer to the 1992 Light Duty Truck Service Manual, Fuel and Emissions Section, for proper accelerator pedal removal and installation.
2.
Retest the TPS voltage. If the voltage readings for 4.3L (LB4) vehicles are still below the specified voltages, replace the accelerator cable with a
redesigned cable (P/N 15693481).
Refer to 1992 Light Duty Truck Service Manual, Fuel and Emissions Section, for proper accelerator cable removal and installation.
SERVICE PARTS INFORMATION
Part Number
Description
Application
Quantity
15693481
Accelerator Control Cable
S/T
1
(LB4 engine)
15679725
Accelerator Pedal Lever Asm.
S/T
1
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Description
Labor Operation
Pedal, Accelerator - Replace
J5350
Cable, Accelerator Control
J5330
(Pedal to Lever) - Replace
Use applicable labor time guide to labor hours.
