S10/T10 P/U 4WD L4-119 1.9L VIN A 2-BBL (1983)
Console: Technical Service Bulletins
Console Door - Lid Appearance Improved
85-116
2B
AUG., 1985
Subject:
CONSOLE DOOR APPEARANCE
Model and Year:
1983-85 S/T TRUCKS AND BLAZERS EQUIPPED RPO D55 CONSOLE
TO:
ALL CHEVROLET DEALERS
The seat separator console on 1983-85 Blazers can be modified to improve the appearance of the lid in the closed position and to allow less closure
effort. These changes include the addition of a spring under the door middle attaching screw and a new spring at the door compartment stop.
Figure No. 1
SERVICE PROCEDURE
^
Remove door from console body (See Figure No. 1).
^
Install two (2) washers, P/N 2077521, and spring, P/N 15544536, under the door center attaching screw on the hinge side. The tab on the spring
should point away from the hinge side of the console (See Figure No. 1).
^
Discard existing spring at the door compartment stop and install spring P/N 15544543 (See Figure No. 1).
^
Reinstall console door.
PARTS INFORMATION
Part Number
Description
Quantity
15544543
Spring
1
15544536
Spring
1
2077521
Washer
2