S10/T10 P/U 4WD L4-119 1.9L VIN A 2-BBL (1983)
Quantity
Part Number
Per Vehicle
Description
14055826
1
Brake Pipe
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated below:
Parts
Failed
Parts
Failure
Labor
Labor
*Other
Net
Count
Part No.
Allowance
Code
Operation
Hours
Hours Amount
00
Vl840
.2
.1
Description:
Inspect vehicle for brake pipe location. No further action is necessary.
Parts
Failed
Parts
Failure
Labor
Labor
*Other
Net
Count
Part No.
Allowance
Code
Operation
Hours
Hours
Amount
1
14055826
00
V1841
.7
.1
2.73
Description:
Inspect and replace brake pipe per service procedure contained in this bulletin.
*Campaign Administrative Allowance
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
**The $2.73 in the "Net Amount Column" represents the material allowance for brake fluid used in conjunction with labor operation V1841.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.
Campaign Identification Label
CAMPAIGN IDENTIFICATION LABEL
Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a
typewriter or ballpoint pen.
Numbe:
84C06
Section:
5
Page No:
6
CAMPAIGN IDENTIFICATION LABEL (CONT'D)
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean dry surface.
ADMINISTRATIVE PROCEDURE
REFER TO THE CURRENT CHEVROLET SERVICE POLICIES AND PROCEDURES MANUAL AND CLAIMS PROCESSING MANUAL FOR
CAMPAIGN HANDLING AND ADMINISTRATIVE PROCEDURES.