S10/T10 P/U 4WD L4-151 2.5L (1985)
2.
REMOVE AND DISCARD OLD HEAT SHIELD ATTACHED TO EGR MOUNTING BOLTS BY REMOVING ONE BOLT ONLY, AND
REINSTALL THE BOLT BACK INTO THE EGR. TORQUE TO 34-44 N-m. (25-32 FT.LBS.).
3.
REMOVE AND DISCARD OLD TPS ATTACHING SCREWS.
4.
INSTALL NEW TPS (1) AND HEAT SHIELD (3) USING NEW ATTACHING SCREWS (2) PROVIDED WITH TPS HEAT SHIELD
SERVICE KIT.
^
TIGHTEN ATTACHING SCREWS TO 2.0 N-m.(18 IN.LBS.).
5.
INSTALL AIR CLEANER ASSEMBLY
