S10/T10 P/U 4WD L4-151 2.5L (1985)
NEW HEAT SHIELD SERVICE KIT
RECOMMENDED PROCEDURE:
1.
REMOVE AIR CLEANER ASSEMBLY.
2.
REMOVE AND DISCARD OLD HEAT SHIELD ATTACHED TO
EGR MOUNTING BOLTS, BY REMOVING ONE BOLT ONLY.
3.
REMOVE AND DISCARD OLD TPS ATTACHING SCREWS.
4.
INSTALL NEW TPS (1) AND HEAT SHIELD (3) USING
NEW ATTACHING SCREWS (2) PROVIDED WITH TPS
HEAT SHIELD SERVICE KIT.
^
TIGHTEN ATTACHING SCREWS TO 18 IN. LBS. (2.0 N-m).
5.
INSPECT TPS CONNECTOR LEAD PER BULLETIN 86-8-10.
Note:
This is a Pontiac Bulletin, see below.
6.
INSTALL AIR CLEANER ASSEMBLY.
Number
86-8-10
Date
2/86
Subject:
TPS WIRING MAY BE RUBBED THRU ON 1984-1986 FIERO
1984 THRU 1986 FIERO WITH 2.5L ENGINE
