S10/T10 P/U 4WD V6-173 2.8L (1986)
2.
Remove door trim panels including arm rests. Reference "Doors" (Section 10A1) in the 1987 Chevrolet S-10 Light Duty Truck Service Manual
(ST-369-87).
FIGURE 1
3.
Disconnect each harness connector (Figure 1, A).
4.
Remove each switch (Figure 1, B). Press in both spring clips to remove each switch.
5.
Install switches (Figure 1, B) P/N 15622301-2.
6.
Connect harness connectors (Figure 1, A).
7.
Install both door trim panels and arm rests (Section 10A1).
8.
Connect battery ground cable to the battery.
Warranty Claim, Reimbursement and Owner Letter Information
WARRANTY CLAIM INFORMATION
