S10/T10 P/U 4WD V6-262 4.3L VIN Z (1992)
Blower Motor Resistor: Service and Repair
With A/C
Evaporator And Blower Assembly Component View
NOTE: The blower resistor is mounted on the blower side of the blower-evaporator case.
REMOVE OR DISCONNECT
1. Electrical connectors, as necessary.
2. Screws (34).
3. Resistor (35).
INSTALL OR CONNECT
1. Resistor (35).
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
2. Screws (34).
3. Electrical connectors, as necessary.
-
Check circuit operation.