S10/T10 P/U 4WD V6-262 4.3L VIN Z (1992)
cable to operate freely
SERVICE PROCEDURE
To correct vehicles encountering the cable slipping out of the pulley replacement of the accelerator cable is necessary. Refer to the appropriate 1992
Light Truck Service Manual, Fuel and Emissions section, page 4- 72 for proper accelerator cable removal and installation.
NOTE:
Before installation, inspect the cable for kinks, curls or bends, especially at the, TBI end.
SERVICE PARTS INFORMATION
Part Number
Description
Application
15693481
Cable Asm-Accel
S/T
15957337
Cable Asm-Accel
M/L
15631395
Cable Asm-Accel
G
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Operation - J5330
Use applicable labor time guide for labor hours.