S10/T10 P/U 4WD V6-4.3L VIN X (1996)
Oil Line: Service and Repair
ENGINE OIL COOLER LINE REPLACEMENT (4WD)
Remote Oil Filter (4WD Model)
REMOVE OR DISCONNECT
1. Bolts holding lines to adapters.
2. Oil cooler lines from radiator to remote oil filter adapter.
3. Seals from adapter.
4. Clamp and bolt.
5. Oil cooler lines from remote oil filter adapter to engine mounted adapter.
6. Seals from remote and engine mounted adapters.
INSTALL OR CONNECT
1. New seals to remote and engine mounted adapters.
2. Oil cooler lines to remote oil filter and engine mounted adapter.
3. Bolts (lines to adapters).
TIGHTEN
-
Bolts to 35 Nm (26 lbs. ft.).