S10/T10 P/U 4WD V6-4.3L VIN X (1996)
Intake Air Temperature (IAT) Sensor: Testing and Inspection
The scan tool displays temperature of the air entering the engine, which should read close to ambient air temperature when engine is cold. The
temperature should rise as underhood temperature increases. If the engine has not been run for several hours (overnight) the IAT sensor temperature and
engine coolant temperature should read close to each other. If the VCM detects a malfunction in the IAT sensor circuit, the following DTCs will set:
^
DTC P0112 circuit low.
^
DTC P0113 circuit high.
^
DTC P0111 circuit intermittent high.
^
DTC P0112 circuit intermittant low.
Refer to System Diagnosis / Diagnostic Tables for testing information. See: Testing and Inspection
