S10/T10 P/U 4WD V6-4.3L VIN X (1996)
Perform flash calibration. Refer to the table for the applicable calibration change. Perform the programming per the latest Tech line information for
programming procedures.
The new calibrations reduce the number of stall saver counts that can be learned while lugging the engine. In addition, these new calibrations minimize
turning on the MIL lamp due to temporary overheating of the oxygen sensors.
Important:
The calibrations listed are FLASH calibrations and are not available from GMSPO. These calibrations are available on 1998 Techline CD ROM Disc
07 and later.
Warranty Information
For vehicles repaired under warranty, use the table.
Labor Operation
Description
Labor Time
J6355
Reprogramming
Use Published Labor
Operation Time