S10/T10 P/U 4WD V6-4.3L VIN X (1996)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Pressure Sensor Electrical Connector
Fuel Pressure Sensor
REMOVAL PROCEDURE
1. Raise the vehicle.
2. Remove the fuel tank. Refer to Fuel Tank. See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair
3. Remove the fuel tank vapor pressure sensor electrical connector.
4. Remove the fuel tank pressure sensor.
INSTALLATION PROCEDURE
1. Install the fuel tank vapor pressure sensor.
2. Install the fuel tank vapor pressure sensor electrical connector.
3. Install the fuel tank. Refer to Fuel Tank. See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair
