Silverado 1500 2WD V6-4.3L (2007)
10. Remove the CMP sensor bolt.
11. Remove the CMP sensor and wiring harness jumper from the engine front cover.
12. Disconnect the CMP sensor wiring harness jumper from the CMP sensor.
13. Remove the CMP sensor from the wiring harness jumper.
14. Remove the front cover bolts.
Important: After the composite front cover is removed do not reinstall the front cover. Always install a NEW front cover.
15. Remove and discard the front cover.
16. Clean all sealing surfaces.
Installation Procedure
