Silverado 1500 2WD V6-4.3L (2007)
Heat Shield: Service and Repair
Floor Panel Heat Shield Replacement
Floor Panel Heat Shield Replacement
Removal Procedure
1. Remove the catalytic converter.
2. If vehicle has a regular cab, remove the exhaust heat shield nuts.
3. Remove the exhaust front heat shield (1) and/or the rear exhaust heat shield (2) from the studs.
4. If vehicle has extended cab, remove the exhaust heat shield nuts.
5. Remove the exhaust front heat shield (1) and/or the rear exhaust heat shield (2) from the studs.
