chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Instruments/Audio - No Speaker Audio/Warning Chimes|Page 23037 > < Initial Inspection and Diagnostic Overview|Page 23027
Page 1
background image

Audible Warning Device: Customer Interest
Instruments/Audio - No Speaker Audio/Warning Chimes

Bulletin No.: 07-08-44-008

Date: April 18, 2007

TECHNICAL

Subject:
No Audio/No Sound Heard from Radio Speakers, Turn Signals, Hazard Signals and No Warning Chimes When a Door or Liftgate is Opened
(Inspect/Seat C2 Audio Amplifier Connector)

Models:
2007 Cadillac Escalade, Escalade ESV, Escalade EXT
2007 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2007 GMC Sierra, Yukon, Yukon XL, Yukon Denali, Yukon Denali XL

with Speakers, Premium Audio w/Amplifier or Rear Stereo Audio (RPOs UQA, UQS or UK6)

Condition

Some customers may comment on one or all of the following conditions related to no audio/no sound:

No sound from one or more of the radio speakers.

No blinking sound heard form the turn signals or hazard signals when on.

No audio warning chimes heard when a door or liftgate is opened.

Cause

The C2 Audio Amplifier Connector may become unseated at the amplifier.

Correction

Inspect/Seat the C2 Audio Amplifier Connector (16-way, Black Connector).

Remove the radio, amplifier, and SIR fuses located in the Underhood Bussed Electrical Center (BEC).

Gain access to the radio speaker amplifier. Refer to Radio Speaker Amplifier Replacement in SI.

Instruments/Audio - No Speaker Audio/Warning Chimes|Page 23037 > < Initial Inspection and Diagnostic Overview|Page 23027