Silverado 1500 2WD V6-4.3L (2007)
Important: Use a NEW steering shaft lock plate retaining ring.
1. Install the following parts onto the steering shaft:
1. Lubricate the turn signal switch cancel cam (3) with GM P/N 12377900 (Canadian P/N 10953529).
2. Turn signal switch cancel cam position plate (2)
3. Steering shaft lock plate retaining ring (1) using compressor J 23653-SIR and adapter J 42137.
2. Install the inflatable restraint steering wheel module coil and the inflatable restraint steering wheel module coil wave washer.
