Silverado 1500 2WD V6-4.3L (2007)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the drain plug and drain the engine oil in a suitable container.
3. Remove the oil filter.
4. Inspect to ensure the engine oil filter gasket is removed.
Installation Procedure
1. Lubricate the oil filter gasket with clean engine oil.
Notice: Refer to Fastener Notice.
2. Install the oil filter.
Tighten the filter to 30 N.m (22 lb ft).
