Silverado 1500 2WD V6-4.3L (2007)
5. Remove the rear axle fill plug.
6. Inspect the lubricant level.
The lubricant level should be between 0-10 mm (0-0.4 in) below the fill plug opening.
7. If the level is low, add lubricant until the level is even with the bottom edge of the fill plug opening. Use the proper fluid. Refer to Fluid and
Lubricant Recommendations.
Notice: Refer to Fastener Notice.
8. Install the rear axle fill plug.
Tighten the rear axle fill plug to 33 N.m (24 lb ft).
9. Lower the vehicle.
