Silverado 1500 2WD V6-4.3L (2007)
4. Connect the EVAP vent solenoid pipe quick connect fitting (3) to the EVAP canister.
5. Install the EVAP canister vent solenoid pipe clip (1) to the frame crossmember.
6. Connect the chassis wiring harness electrical connector to the EVAP canister vent solenoid.
7. Install EVAP canister vent solenoid clip (1) to the chassis EVAP line.
8. Install the EVAP canister vent solenoid pipe to the clip (2) on the chassis EVAP line.
9. Install the EVAP canister vent solenoid pipe to the clips (3) on the brake pipes.
10. Lower the vehicle.
