Silverado 1500 2WD V6-4.3L (2007)
10. Remove the EVAP canister vent solenoid clip (1) from the chassis EVAP line and secure out of the way.
11. Remove the EVAP canister vent solenoid pipe clip (2) from the chassis line.
12. Disconnect the fuel tank fuel feed line quick connect fitting from the chassis line.
13. Disconnect the chassis EVAP line quick connect fitting from the EVAP canister.
14. Cap the fuel and EVAP lines in order to prevent possible fuel and/or EVAP system contamination.
15. Remove the fuel line bracket bolt (1).
16. Remove the fuel/EVAP line clip nut (2).
17. Remove the fuel/EVAP line clips from the frame and crossmember.
18. Remove the fuel/EVAP line assembly from the vehicle.
Installation Procedure
