Silverado 1500 2WD V6-4.3L (2007)
Band Apply Servo: Service and Repair
2-4 Servo
Tools Required
J 29714-A Servo Cover Depressor
Removal Procedure
1. Remove the catalytic converter pipe.
2. Remove the heat shield bolts.
3. Remove the heat shield.
4. Support the transmission.
5. Remove the transmission crossmember.
6. Lower the transmission with a suitable jack.
7. Remove the oil pan bolt below the servo.
8. Install the J 29714-A.
9. Tighten the bolt on J 29714-A in order to compress the servo cover.
10. Remove the servo cover ring.
11. Remove the J 29714-A.