Silverado 1500 2WD V6-4.3L (2007)
Fluid Line/Hose: Service and Repair
Allison - Automatic Transmission
Transmission Fluid Cooler Hose/Pipe Connector Replacement
Transmission Fluid Cooler Hose/Pipe Connector Replacement
Removal Procedure
1. Disconnect the hose from the transmission oil cooler pipe connector being replaced.
2. Remove the transmission oil cooler pipe connectors (1) and (2).
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install new transmission oil cooler pipe connectors (1 and 2).
Tighten to 25 N.m (18 lb ft).
2. Connect the hose to the transmission oil cooler pipe connectors.
Transmission Fluid Cooler Hose/Pipe Replacement
Transmission Fluid Cooler Hose/Pipe Replacement
Removal Procedure
1. Remove the radiator grille.
