Silverado 1500 2WD V6-4.3L (2007)
Shift Cable: Adjustments
4L60-E/4L65-E/4L70-E - Automatic Transmission
Range Selector Lever Cable Adjustment
1. Ensure that the steering column shift lever is in the park (P) position.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Ensure that the transmission manual shaft lever is in the park (P) position.
4. Grasp the shift cable shifter end (1) in the left hand and the shift cable transmission end (2) in the right hand.
5. Align the outside diameter of the transmission end (2) with the inside diameter of the shifter end (1).
6. Push the end of the transmission cable (3) inside the shifter end until the blue spring (2) on the transmission end (3) is fully compressed, this will
engage the inner wire and lock both wires together.
