Silverado 1500 2WD V6-4.3L (2007)
17. Install the clips on the cable to the floor panel reinforcement.
18. Lower the vehicle.
19. Test the transmission for proper shift operation.
20. If all of the gear positions cannot be achieved, adjust the cable.
Range Selector Lever Cable Bracket Replacement
Range Selector Lever Cable Bracket Replacement
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into neutral.
3. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
4. Remove the retainer that secures the cable to the bracket.
5. Depress the tangs and remove the cable from the bracket.
6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
7. Remove the transmission range selector cable bracket.
Installation Procedure