Silverado 1500 2WD V6-4.3L (2007)
Shift Cable: Service and Repair
Allison - Automatic Transmission
Range Selector Lever Cable Replacement
Removal Procedure
1. Position the steering column shift lever to the park position.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the range selector cable heat shield bolts.
4. Remove the range selector cable heat shield.
5. Ensure the transmission manual shaft is positioned in mechanical park.
6. Remove the range selector cable end from the transmission range selector lever stud.
7. Remove the retainer securing the range selector cable to the bracket.