Silverado 1500 2WD V6-4.3L (2007)
6. Remove the cable end from the steering column ball stud.
7. Depress the tangs and remove the cable from the steering column bracket.
Important: Avoid unnecessary twisting/bending of the range selector cable when removing the cable from the support.
8. Remove the range selector cable from the support.
9. Remove the cable grommet from the floor panel.
10. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
11. Remove the clips on the cable from the floor panel reinforcement.
12. Ensure the transmission manual shaft is positioned in mechanical park.
13. Remove the cable clip on the transfer case, if equipped.
