Silverado 1500 2WD V6-4.3L (2007)
Align the reference marks made during removal.
11. Install the propeller shaft yoke retaining clamps and the bolts.
Tighten the propeller shaft yoke retaining clamp bolts to 25 N.m (18 lb ft).
12. Install the axle shafts (10.5 inch, 11.5 inch axle).
13. Install the brake rotors (8.6 inch, 9.5 inch axles).
14. Install the brake calipers (8.6 inch, 9.5 inch axles).
15. Install the tire and wheel assemblies.
16. Inspect and add axle lubricant to the axle housing, if necessary.
17. Lower the vehicle.
