chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 14177 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 14175

Silverado 1500 2WD V6-4.3L (2007)

Page 2
background image

5. Place an alignment mark between the pinion and the pinion yoke.

6. Install the J 8614-01 as shown.
7. While holding the J 8614-01, loosen the pinion nut.
8. Remove the washer.

9. Remove the pinion nut and washer.

10. Install the J 8614-2 (2) and the J 8614-3 (3) into the J 8614-01 (1) as shown.

Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 14177 > < Drive Pinion Flange/Yoke and/or Oil Seal Replacement (All Except 9.75 Inch Axle)|Page 14175