chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14255 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14253

Silverado 1500 2WD V6-4.3L (2007)

Page 10
background image

Note: Ensure the seal is fully seated in the hub bore.

13. Using the J 44420 installer (2) and the J 8092 handle (1), install the new oil seal.
14. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

Note: If the rear axle hub assembly does not fully seat itself onto the axle shaft spindle and is removed, the rear axle hub seal must be replaced.

15. Install the rear axle hub.

Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14255 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14253