chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14337 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14335

Silverado 1500 2WD V6-4.3L (2007)

Page 5
background image

8. Turn the wheel hub over and install the inner bearing cup.

9. Drive the inner bearing cup into the wheel hub using the J 24427 (2) and the J 8092 (1).

10. Install the inner bearing.

Important: The rubber outer sealing rings of the oil seal must be driven into the wheel hub first. 

11. Install the new oil seal using the J 44420 (2) and the J 8092 (1).
12. Install the rotor, if necessary.
13. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.

Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14337 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 14335