Silverado 1500 2WD V6-4.3L VIN X (2004)
Engine Mount: Service and Repair
Left
Engine Mount Replacement - Left
Removal Procedure
Notice: Refer to Engine Mounting Notice in Service Precautions.
1. From under the hood, remove the engine mount to engine mount bracket bolts. (right side shown, left side similar).
2. Raise and suitably support the vehicle.
3. Remove the oil pan skid plate bolts and plate.
4. Using an adjustable jack on the square tab at the rear of the engine block, raise the engine.
Notice:
Refer to Engine Lifting Notice in Service Precautions.